Whirlpool EDR1RXD1 Refrigerator Water Filter (Filter1), 2-Pack

Whirlpool EDR1RXD1 | Our#: 180694
2 pack

Whirlpool EDR1RXD1 Refrigerator Water Filter (Filter 1)

  • Change Every 6 Months
  • 30 - 120 PSI
  • 33 - 100 °F
  • 200 Gallon Capacity
  • 0.5 GPM Flow Rate
As Low As $52.95 Per Filter
In Stock
Ships Tomorrow, Sep. 16th
Est. Delivery By Sep. 23rd
Choose a quantity

The factory original Whirlpool EveryDrop EDR1RXD1 (AKA FILTER 1) takes over for the W10295370 filters and is used in refrigerators by Whirlpool, KitchenAid, Maytag, Amana, Jenn-Air, Kenmore and others.  The Whirlpool EDR1RXD1 filter creates better tasting water for drinking and making beverages as well as clean, clearer, healthy ice. 


  • Original OEM product
  • Easy installation and operation
  • Helps reduce chlorine taste and odor
  • Helps reduce contaminants found in tap water and improves its quality
  • Tested by NSF International against Standard 42 for the reduction of chlorine taste and odor and particulate
  • Tested by NSF International against Standard 53 for the reduction of lead, cysts, turbidity and other chemicals and impurities
  • Replaces the popular W10295370 / W10295370A filter

The Whirlpool EDR1RXD1 is compatible with the following obsolete or alternate filter part numbers:

  • 10276924
  • 10291030
  • 10295370
  • 10295370A
  • 46-9081
  • 46-9930
  • 469930
  • 9081
  • 9930
  • EDR1RXD1
  • F17
  • FILTER 1
  • FUW5370UPS
  • GP001
  • GRE1001
  • NYTTIG-WFL-200
  • P4RFWB
  • P5WB2L
  • PS2378001
  • RFC3700A
  • SW07
  • W10217316
  • W10276924
  • W10291030
  • W10295370
  • W10295370-AX
  • W10295370A
  • W10743248
  • WF537

How To Install The Whirlpool EDR1RXD1 Filter:

  1. Locate the water filter in the top-right corner of the refrigerator compartment
  2. Lift open the filter cover door. The filter will be released and then eject as the door is opened
  3. When the door is completely open, pull the filter straight out
  4. Take the new filter out of its packaging and remove the covers from the O-rings. Be sure the O-rings are still in place after the covers are removed
  5. With the arrow pointing up, align the new filter with the filter housing and slide it into place. The filter cover door will automatically begin to close as the new filter is inserted
  6. Close the filter cover door completely in order to snap the filter into place. You may need to press hard
  7. Flush the water system
  8. Reset filter status light following instructions in your owners manual
  9. Replace filter every 6 months